Dishwasher Repair in Kent — Book a Visit Today

Cloudy glasses, gritty plates, standing water in the bottom. Those three complaints cover most dishwasher calls we take. The cause might be a tired wash pump, a plugged filter, a spray arm that no longer spins, or a drain line routed wrong under the sink. We look at the whole cycle, not just the symptom. Hard water leaves mineral scale on heaters and seals, and we clean and replace what the scale has ruined. Kent kitchens, all major brands, independent repair. Tell us what the last load looked like when you call us.

Real person answers
Open 7 days
Written quotes

Call (800) 712-6387

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM MT

Dishwasher Repair technician in Kent, WA

Common dishwasher faults in Kent homes

Dishes come out with sandy grit on them Clogged filter, blocked spray arm holes, or heavy mineral scale
There's standing water in the bottom every morning Drain pump obstruction, kinked drain hose, or failed check valve
It runs forever and never finishes Heating element or thermistor not reaching cycle temperature
Water on the floor by the left corner Door gasket, tub seal, or a leaking hose clamp under the base
Press start and nothing happens at all Door latch switch, control board, or lost power at the junction box

Kent coverage

From Kent we cover 98030, 98031, 98032 and 98003, plus nearby Des Moines, Auburn, Federal Way and SeaTac.

Other repairs we do in Kent

All dishwasher repair → · All Kent services →

Dishwasher Repair in Kent — quick answers

Why does my dishwasher smell sour?

Food sludge builds up in the filter, the sump, and along the door gasket. Rinse the filter, wipe the gasket folds, and run a hot cycle empty. If the odor returns within days, the drain hose or sump may be holding standing water.

Is a leak always the door seal?

No. Water can escape from a cracked tub, a loose hose clamp, the pump housing, or a worn seal on the wash motor. We run the machine with the lower panel off and watch where the drip starts. That tells us the part.

Can hard water really break a dishwasher?

It shortens the life of things. Scale coats the heating element so the water never gets hot enough, plugs spray arm jets, and stiffens valves. Regular descaling helps. Once a valve or element is fouled, replacement is usually the honest fix.

Should I repair or replace an older unit?

Depends on what failed. Pumps, valves, latches, and heating elements are common repairs on a machine with a sound tub and rack system. A cracked tub or a dead control board on a very old unit tips the math toward replacement.

How soon can someone get to my house in Kent?

Most Kent appointments land within a day or two, and we hold same-day slots when a route opens up. Call us early and mention your ZIP — 98032 and 98031 runs often fill first. We give you an arrival window, not a whole day of waiting.

How it works

Step 1
Tell us the symptom
Call us or fill out the form. Describe what you hear, smell, or see. Noise, leak, error code, smell of burning. Small details help us load the right parts on the van.
Step 2
We come look
A technician arrives at your home and tests the machine instead of guessing. You hear what failed, what it takes to fix, and what we'd do if it were our own kitchen.
Step 3
Repair and check
Many parts ride with us, so common failures get handled the same visit. Harder parts we order. Then we run the appliance through a cycle and confirm the problem is actually gone.

Call (800) 712-6387

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Western conditions, plainlyHard well water scales up dishwasher jets and water heater lines. Summer heat pushes refrigerator compressors hard. Winter garages freeze washer valves. We see those patterns weekly and check for them before chasing something exotic.
Brand independentWe are not tied to any manufacturer. That means we work on the mixed lineup most homes actually have: one brand of range, another of laundry, a fridge someone bought used. Same technician, same visit.
Steady, not rushedRushing is how a diagnosis goes wrong. We take the time to pull the panel, test the part, and read the board. If a repair does not make sense for the age of the machine, we say that out loud.
Straight schedulingYou get a real appointment window and a heads-up when the technician is on the way. Rural addresses and long mountain driveways are normal for us. Tell us about the gate or the gravel and we'll plan for it.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.